FREE U.S. SHIPPING ON ORDERS OVER $35
Amazing LED Under Cabinet Lighting with IR Sensor
Are you looking for extra long, bright under cabinet lights instead of a set of too small ones? Are you tired of having to use remote controls to open your light when you work or cook?
If so, we have the IDEAL solution for you: Our 3 Extra Long Panels EShine LED Under Cabinet Lighting
Easy to Install
Two installation options are included: Simple screws option and the 3M Sticker if you want a sturdy no-damage choice for expensive cabinets.
Available in Two Colors
Get yours in either Warm White(Model EL5003W) or Cool White(Model EL5003C). Warm White is best for home environments and Cold White suits modern or office rooms best.
Your Satisfaction is Guaranteed
If you're not 100% pleased with this purchase we give you a complete refund. Simple as that!
Order Your LED Under Cabinet Light Now at Premium Price!
3 X LED strip light (LED panel has 45 LED's and 430lm brightness). Panel Size 19.69(L) X 0.38(H) X 1.13 (W) inch .
6X Wire Clips with 3M sticker preinstalled
3X 3M double-sided stickers
2X Connections cables (3.3 ft each)
6X Screw caps
1X 18W power supply (with 4.9ft cord)
EShine LED lighting kits and accessories come with 3-Year Warranty.
|Item Weight||1.45 pounds|
|Assembled Height||0.38 inches|
|Assembled Length||19.69 inches|
|Assembled Width||1.13 inches|
|Color Rendering Index||82|
|Number of Lights||3|
|Specific Uses||Indoor use only|
|Fixture Features||Dimmable, Hand Wave Activated|
|Power Source||corded-electric, 12V DC Power supply|
|Switch Installation Type||3m sticker, 2-sided-tape, screw in|
|Luminous Flux||1260 lm|
I will be using these for above cabinet lighting. They will be powered on and off by a wall switch with a dimmer. Will these work for that application. If not, do you have any product that will?? The key is that they need to be dimmable. Thanks!!
You can control lights by regular switch, but you will need to bypass sensor. To bypass sensor you need to connect power cord to opposite side of marked side of the panel with IR sensor (marked “Connect Power”). This way light can be controlled by the switch and dimmer (if you have one) or plug/unplug power supply, but you can not use dimmable switches on 110V circuit, only on/off function because our power supply converts 110V to 12V and they are NOT dimmable transformers. You can hardwire it, but you will need to get transformer from 110V to 12V DC, because operating voltage is 12V DC.
what dimension does the cable have from the power supply?
The length of the power supply cable has a dimension of 4.9 ft
whether panels on both sides can be connected to the sensor panel, i.e. can it be in the middle?
Unfortunately, no, the panel with the IR sensor should be the first in the line.