FREE U.S. SHIPPING ON ORDERS OVER $35
High Quality LED Under Cabinet Lighting 6 Panel Kit
Are you looking for a few Under Cabinet Lights to brighten up a dark spot in your kitchen? Are remote controlled lights too much of a bother to open when you're cooking? If so, we have the PERFECT solution for you: The IR Sensor LED Under Cabinet Kit by EShine!
Sturdy and Economic
This kit is made from the best materials and uses an economic 24 Watt Power Supply.
Easy to Install
Two installation methods are included: Simple screws method and 6 powerful 3M stickers for a no-damage options, so you don't ruin your precious cabinets.
Fun to Use
Just wave your hand at the sensitive IR Sensor and the light will turn ON. Just do the same to turn it OFF. It is that simple and fun!
Available in two colors: Cool White (Model EL3006C) and Warm White (Model EL3006W).
You Satisfaction is Guaranteed. You either love it or we give you a full refund.
Order Yours Now at a Premium Price and 100% Risk Free!
6X LED strip lights (One panel has 30 LED's and 230lm brightness). Panel Size 11.81(L) X 0.38(H) X 1.13 (W) inch .
5X Connection cables (3.3 ft each)
15X Wire Clips with 3M sticker preinstalled
6X 3M double-sided stickers
12X Screw caps
1X 24W power supply (with 4.9ft cord)
If you need accessories such as longer interconnect cable or extension cable for an adapter, it is available for purchase.
EShine LED lighting kits and accessories come with 3-Year Warranty.
|Item Weight||1.6 pounds|
|Assembled Height||0.38 inches|
|Assembled Length||11.81 inches|
|Assembled Width||1.13 inches|
|Color Rendering Index||82|
|Number of Lights||6|
|Specific Uses||Indoor use only|
|Fixture Features||Hand Wave Activated|
|Power Source||corded-electric, 12V DC Power Supply|
|Switch Installation Type||3m sticker, screw in|
|Luminous Flux||1380 lm|
Do you have or make with blue lights?
No, unfortunately, these lights cannot be blue.
Is this product UL approved with the certified logo located on it?
Yes, our power supply is UL approved
Hi. I'm looking for 2 lights on one wall and 4 lights on an opposite wall. Can I buy 2 three pack deluxe kits and configure them for that? Thanks.
Yes, the power supply included in the kit will be enough to connect 4 and 2 panels separately.
Can the IR sensor be disables so it can be used exclusively with a wall switch?
You can control lights by regular switch, but you will need to bypass sensor. To bypass sensor you need to connect power cord to opposite side of marked side of the panel with IR sensor (marked “Connect Power”). This way light can be controlled by the switch and dimmer (if you have one) or plug/unplug power supply, but you can not use dimmable switches on 110V circuit, only on/off function because our power supply converts 110V to 12V and they are NOT dimmable transformers. You can hardwire it, but you will need to get transformer from 110V to 12V DC because operating voltage is 12V DC. We suggest that you contact licensed electrician for this type of installation.
Is it possible to string 9 lights together, end to end, and still use one plug? I have a 9' long run of cabinets I'd like to put these under.
Yes, it is possible, but max allowed 12-inch panels for 6 panels kit is 9. Even you will use a higher wattage adapter, it will not work properly due to low voltage. Yes it is possible, but
Is this dimmable via a Luton wall switch connect to an outlet?
Thanks for your attention to our product. You can control lights by the regular wall switch, but you will need to bypass sensor. To bypass sensor you need to connect the power cord to opposite side of the marked side of the panel with IR sensor (marked “Connect Power”). This way light can be controlled by the switch and dimmer (if you have one) or plug/unplug the power supply, but you can not use dimmable switches on the 110V circuit, only on/off function because our power supply converts 110V to 12V and they are NOT dimmable transformers. You can hardwire it, but you will need to get the transformer from 110V to 12V DC, because the operating voltage is 12V DC. We suggest that you contact licensed electrician for this type of installation. Please let me know if you have any further questions or need assistance.