Free U.S. Shipping on orders over $25
380 In stock
- LIGHT IN MOTION: This portable, powerful, battery-operated LED light bar from EShine gives you all the light when you need it, and less or no light when you don’t. With three levels of dimness, you can easily switch from a bright work light to a soothing nightlight and realize huge battery savings in the bargain. The motion sensor will activate your light if it detects movement within about ten feet.
- IN-PLACE OR ON THE GO: Whether you need an awning light for your RV, shelf lights for your wardrobe, or under-cabinet lighting that’s wireless, this dimmable LED light bar does it all. With 4.5 hours of always-on brilliant light at 100% brightness and 15 hours at 30%, you’ll have unparalleled lighting flexibility. The 1300 mAh battery pack charges in just 2.5-3.5 hours via the included USB cable.
- EASY INSTALL: If you have ironwork near where you want the light, simply attach it via the built-in magnet. Otherwise, use the magnetic adhesive strip or three screws, -- all included – to experience dazzling LED light just minutes after you open the box.
- LIGHT YOUR WAY: You can operate the EShine LED light strip in four modes: always-on, only in low light when motion is detected, motion-sensing only, or off. Simply hold the switch two seconds to turn on, then tap to select the desired mode, and hold again to turn off. Achieve the exact light level you want by tapping on the dimmer switch when the light is on; it will remember its brightness setting the next time it’s activated.
- ADJUSTABLE TIMING: You can easily adjust time after light will turn OFF if no movement is detected. Choose desired time 20, 40, 60, and 120 sec or you can also use ALWAYS ON mode if you need constant light.
- LED SATISFACTION: We back our motion sensor light with a full, three-year warranty. If anything goes wrong, we’re an email away to make it right with a refund or replacement. Enjoy 5000K white light when and where you need it; Click Add To Cart and order your EShine LED Light Bar today!
Light In Motion
Do you want the convenience and flexibility of wireless lighting without the need to constantly replace batteries?
Have you been searching for a rechargeable light that will actually last the night?
Have you had it with poor-quality LED lights that don’t stand the test of time?
Enjoy The Next Generation of Wireless, Motion-Activated LED Lighting with This Rechargeable Light Bar from EShine!
With 33 LEDs and a thin profile measuring 10” in length, this wireless, rechargeable LED light bar gives you all the light you want and none you don’t, whether you use it in always-on or motion-activated mode.
Three Levels of Light: Simply tap the brightness control while the light is on to toggle between three levels: 30%, 65%, and 100%. This is an easy way to maximize battery life over time; you’ll get around 15 hours of always-on light at 30% brightness and about 4:30 at full.
Three Ways to Light: Thanks to its included magnetic strip, you can just stick this light onto any ironwork or magnetic surface. Otherwise, either adhere it using the adhesive strip or use the three screws, both included. You’ll be online in no time!
Three Working Modes: Hold the switch to activate, then toggle between always-on, light+motion, and motion only; hold the switch to turn off.
Fit Anywhere: The EShine Wireless Light Bar is extremely versatile. From the kitchen to the office to the wardrobe to the workshop to the basement to the front porch, this light goes wherever you need it.
- 1x LED Motion Sensor Light with Battery 1300 mAh
- 1x USB Cable
- 1x 3m Adhesive Magnetic Strip
- 2x Screws
LED Satisfaction Guarantee:
If you’re not 100% happy with your EShine Wireless Light Bar, simply shoot us an email and we’ll make it right with a refund or replacement.
Warm LED Light Wherever and Whenever You Need It; Order Your Motion-Activated Rechargeable LED Today!
[tab title="TECHNICAL DETAILS"]
|Item Weight||8 ounces|
|Assembled Height||0.56 inches|
|Assembled Length||10 inches|
|Assembled Width||1.68 inches|
|Color Rendering Index||90|
|Number of Lights||1|
|Specific Uses||Indoor use only|
|Fixture Features||3-level Dimmer, 4 Operational Modes, Motion sensor, Battery operated|
|Switch Installation Type||screw in, magnets, adhesive|
|Luminous Flux||100 lm|
QUESTIONS & ANSWERSAsk a Question
I lost the paperwork that came with my Shine Rechargeable motion activated LED light. How do you get the motion sensor to work?
1. Mode 1 (Always On): Light for the long light state. In this mode, the lamps operate continuously. High battery consumption.
Long press the switch about 2 seconds to turn on the light and it enters into Always On Mode.
2. Mode 2 (Motion & Light Sensor): Under dark enough condition, Automatically powers on when motion is detected within 3 meters, automatically turned off after 20 seconds of inactivity. Low battery consumption.
After turning on the light, short press the switch, green indicator flash for 1 second, it enters into Motion & Light Sensor Mode.
3. Mode 3 (Only Motion Sensor): Automatically powers on when motion is detected within 3 meters, automatically turned off after 20 seconds of inactivity. You may use this mode in daytime. Low battery consumption.
Short press the switch twice, red indicator flash for 1 second, it enters into Only Motion Sensor Mode.
4. Short press the switch repeatedly, Mode 2 and Mode 3 will be chosen repeatedly.
5. Mode 4 (OFF): Long press the switch about 2 seconds to turn off the light.
IMPORTANT: When finding LED dimmed, please charge it.