12 inch 24V - with IR Sensor - LED Dimmable Bar (No Power Supply Included)

IMPORTANT: Compatible with 24V lighting ONLY .

Before purchase make sure you have 24 Volts system or 24 Volts power source. 

Contact support if have question before purchase 

【Extension or Single Unit LED bar】You can either use this 12 inch LED bar as an addition to your existing project or as a standalone component to create your own customized kit.

【Hand wave activated】The Hand Wave Motion Sensor of our Under Cabinet Lights turn ON/OFF with a simple wave. Great for Busy Days in the Kitchen. No pesky remote control that gets dirty and bothers you while you work.

【Touchless dimming control】Hold your hand under the motion sensor to adjust brightness of the light.

【Complete Install】This product is exclusively compatible with 24V EShine Lighting and includes all necessary installation accessories. Power supply is NOT included.

【Energy-efficient】Our LED cabinet lights are designed to be energy-efficient. You can rest easy knowing that you're doing your part for the environment while keeping your electric bill low.

Expand your EShine 24V Lighting System or customize your own kit with this individual LED Under Cabinet. This is LED Under Cabinet Bar compatible with EShine 24V Lighting System. This bar has Hand wave motion sensor and also touchless dimming control.

All of EShine kits are fully modular. Just make sure that your power supply has enough wattage and have similar voltage (THIS IS VERY IMPORTANT) to add the extra panels needed for your project! If you connect bar which has different voltage it will NOT work with your existing system.

DO NOT overload power supply, follow our wattage consumption chart:
7"- 2W+-10%
12"- 3W+-10%
20" - 5W+-10%
40" - 10W+-10%

Make sure total sum of wattage in your system do not go over of your power supply capacity.
Example: 12 inch panel consumes 3W, you can add up to 4 12 in led bars to 12W power supply.

PACKAGE CONTENT:
1X LED strip light with Hand Wave Motion Sensor (One bar has 30 LED's and 280 lm brightness). Bar Size 11.81(L) X 0.38(H) X 1.13 (W) inch.
1X Connection cable (3.3 ft)
1X Connector
2X Wire Clips with 3M sticker preinstalled
1X 3M double-sided stickers
2X Screws
2X Screw caps